Damage and fracture prediction of plastic-bonded explosive by digital image correlation processing

By digital correlation processing of Scanning electronic microscopy (SEM) images, the paper presents the deformation and damage analysis of an energetic material—the plastic-bonded explosive (PBX) on mesoscopic scale. The analysis is made by observing the deformation field resulted from the digital image correlation (DIC) processing of the images corresponding to the loading steps and comparing with the surface profiles of the composite material so as to visualize the matter damage near a preset crack. The results show that the local deformation disturbance can reveal the material damage even happened underneath the specimen surface. The strain distribution in the front of the preset crack, can be used to predict the propagating route of the microcrack initiated from the tip of the pre-crack, which is related to the splitting fracture of the granular-based composite under compressive loading.     

Number-theoretic interpretation and construction of a digital circle

This paper presents a new interpretation of a digital circle in terms of the distribution of square numbers in discrete intervals. The number-theoretic analysis that leads to many important properties of a digital circle succinctly captures the original perspectives of digital calculus and digital geometry for its visualization and characterization. To demonstrate the capability and efficacy of the proposed method, two simple algorithms for the construction of digital circles, based on simple number-theoretic concepts, have been reported. Both the algorithms require only a few primitive operations and are completely devoid of any floating-point computation. To speed up the computation, especially for circular arcs of high radii, a hybridized version of these two algorithms has been given. Experimental results have been furnished to elucidate the analytical power and algorithmic efficiency of the proposed approach. It has been also shown, how and why, for sufficiently high radius, the number-theoretic technique can expedite a circle construction algorithm.     

Impact of the spatial coherence on self-interference digital holography

Owing to the unique feature that the signal and reference waves of self-interference digital holography (SIDH) contain the same spatial information from the same point of object, compared with conventional digital holography, the SIDH has the special spatial coherence properties. We present a statistical optics approach to analyzing the formation of cross-correlation image in SIDH. Our study reveals that the spatial coherence of illumination light can greatly influence the imaging characteristics of SIDH, and the impact extent of the spatial coherence depends substantially on the recording distance of hologram. The theoretical conclusions are supported well by numerical simulation and optical experiments.     

Green Determination of Total Iron in Water by Digital Image Colorimetry

A green iOS digital image colorimeter was fabricated for the determination of total iron in natural water. A mobile application operating on an iOS device was designed using Euclidean distance theory to perform iron determination. The application records the components of the color by storing red, green, and blue values as well as calculating the hue, saturation, brightness, and gray values using standard color theory. The component values obtained from the images of orange solutions of iron(II) complex with 1,10-phenanthroline were collected in a database and used for evaluation of the total iron concentration in water samples. Under the optimal conditions for solid-phase extraction used for sample preconcentration, the enrichment factor was 8.18. The iron concentration was determined by this device for concentrations from 0.01 to 1.0?ppm. The iOS digital image colorimeter achieved a limit of quantitation of 0.1?ppm. The accuracy and precision of the iOS digital image colorimeter were validated using a certified reference material, riverine water. The instrumentation was used for the analysis of natural water samples.     

Experimental characterization of dynamic behaviour of gelatin-based material using DIC

In this paper, the dynamic response of gelatin-based soft material under impact loading is investigated. The dynamic tests are principally performed by the classical SHPB (Split Hopkinson Pressure Bars) technique. However, due to the very low mechanical impedance of the specimen compared with the Hopkinson bars, the feeble impact forces are measured by highly sensitive piezoelectric polyvinylidene fluoride (PVDF) pressure sensors instead of SHPB measurement system. The PVDF pressure sensors are placed on the interfaces between the specimen and the bars. During the impact test, the non-equilibrium stress state and inhomogeneous strain fields are developed in the specimen; a digital image correlation (DIC) technique is proposed to identify the inhomogeneous displacement fields using high speed photography. A non-parametric approach based on the DIC technique is developed to deduce the transient stress fields in the longitudinal and transverse directions from the displacement fields measured by DIC. The validation of the calculated stress fields is performed by comparing them with the stress measurements from the PVDF pressure sensor at the bottom end of the specimen. Furthermore, stress-strain response is carried out using this approach throughout the specimen. It is clearly shown that the average highest strain rate varies with position in the specimen. This lead to multiple stress-strain relations determined at different strain rates by only one impact test. The significant strain rate sensitivity is observed at the tested rate range from 81/s to 269/s. Under compression loading, the axial stress state is developed as a simple compression only in the central part of the specimen due to the friction at the interfaces between the specimen and the bars. According to the calculated results based on movement of “long waves”, the region of the simple compression stress state in the central part of the specimen is localized. It is observed that the axial stress is much more important than the transverse stress in the central part and this confirms the assumption of uni-axial compression stress state in the specimen.     

The application of digital image recognition to the analysis of two-dimensional fingerprints

High-performance liquid chromatography (HPLC) fingerprint has been commonly used in the quality control and assessment of herbal medicines, and two-dimensional (2D) fingerprint obtained by means of HPLC-diode array detector (HPLC/DAD) can provide higher reliability. In this paper, an approach to the analysis of the 2D HPLC/DAD fingerprints, which was based on digital image recognition techniques, was developed for the first time. First, wavelet transform was employed to eliminate noise signal in the 2D fingerprint, and then the 2D fingerprint was converted into grayscale image. Second, several features of the image were calculated, and hierarchical clustering. This approach was applied to the qualitative analysis of the different samples of coptis chinensis, and the clustering result of samples was all highly consistent with the real situation. Based on the densities in grayscale image, three components in standard samples were quantitative analyzed, and the obtained correlation coefficients between concentration and grayscale density were more than 0.999. Our study indicated that the analysis of the 2D HPLC/DAD fingerprint was successful based on the idea and techniques of digital image recognition techniques, and this proposed approach provided a new pathway for the analysis of two-dimensional spectrums.     

中波红外景象投影光学系统消热差设计

针对红外成像系统性能测试与评估的应用需求,设计了一套基于数字微镜器件的消热差的中波红外景象投影光学系统.探讨了红外视景仿真用投影光学系统的像差特性和设计方法,并对投影系统的无热化进行了分析.采用分光板和补偿板方案,解决了大相对孔径条件下投影系统的远心照明分光和像差平衡问题,提高了分辨率和均匀性,增大了视场.系统由远心投...     

一种在二步相移数字全息中实现准确相移的方法

相移数字全息中的相移准确性决定了重建结果的质量,本文提出了在二步相移数字全息中.实现准确相移的方法.该方法使用数字电压源开环控制普通的压电陶瓷微位移器,通过连续以微小的间隔来改变施加在压电陶瓷微位移器上的电压,可以获得一系列对应于不同相移角的全息图像,进而可以利用这些全息图像重建出来物光波在全息面上的强度分布.实验中采...     

无人机光电载荷图像处理器的设计

介绍了无人机载设备的技术特点及机载小型图像处理器的组成。采用TI公司的数字信号处理器芯片为核心处理器,配合现场可编程逻辑器件(FPGA)与外部管理微控制单元(MCU)来实现目标数据的采集与处理,设计了适用于无人机光电载荷的超小型图像处理器系统。针对机载设备的特点,设计时充分考虑了体积、重量、功耗等要求。该系统已应用于多台套机载光电载荷中,工作稳定可靠,满足无人侦察机对捕捉和定位目标的要求。